Question about Singer Sewing Machines
...bobbin case.) Fourth, if there is not enough wiggle room, take out the screws that hold the metal cover plate. It should be very easy to see the hook and see when the bobbin case drops into
Question about Kenmore Sewing Machines
...bobbin, hook, race) 6.Wrong bobbin (replace with proper machine bobbin) 7.Bobbin thread tension too high (reduce bobbin spring pressure, likewise top thread tension) 8.Poor quality or extremely light ...
...bobbin hook cover I removed the bobbin, and then the bobbin case to get out a stuck thread, then inadvertently put the bobbin back in the case without pushing the bobbin hook cover back. Now I can't ...
...hook race (below the bobbin case). The complete cleaning procedure for this area is, with the needle fully up, remove the bobbin case and rotate the arms that hold the hook outwards. Remove the hook ...
...inserted into the bobbin case backwardsif the bobbin is not in backwards and the bobbin is inserted correctlythen the hook and hook race should be checked by a repair shop to see if they are ...
...bobbin door at the hook race and you will see that the hook driver (a black plastic disc with a metal part curving round one edge) is positioned with the metal part on your left. Pick up the hook by ...
Question about Sewing Machines
...hook and bobbin are in place and locked in. if i take the hook out the needle will go down with just the hook race in place. i've done and undone many times and all the parts seem to be snuggly where ...
...BOBBIN SHOULD "HOOK" THE TOP THREAD AND BRING THE THREAD AROUND THE BOBBIN THREAD. THE NEEDLE AND TOP THREAD SHOULD BE PULLING THE BOBBIN THREAD UPWARDS. IF THE HOOK DIDN'T "HOOK" THE NEEDLE THREAD ...
Question about Sewing Machines
...hook race cover. The bobbin case release lever doesn't seem to be working properly, and case won't pop out of hook race. I've removed the hook race cover from the machine and tried to poke the bobbin ...
...bobbin hook. Loosen all four screws. If you turn the bobbin by hand, you will see the bar flex back and forth. Turn the bobbin all the way to the right and tighten the screws. The hook should now ...
117 questions posted
Usually answered in minutes!
760 Questions
564 Questions
372 Questions
252 Questions
263 Questions