Question about Sewing Machines
...wrong hoop size, suggesting a 100x100 hoop. If I put the 100x100 hoop in, it tells me the design is to large. How do I get the machine to read the correct hoop size? The hoop size reflected on the ...
Question about Singer Sewing Machines
...wrong hoop size looked it up n it's saying malfunction First time I have used this model but have had CE 250 model Ok, there are a couple of possibilities, and I'm going to include an image. I"m not ...
wrong hoop display My machine shows I have attatched the wrong hoop, which I have not. I tried to fool it by taking it off and then on again. It refuses to sew though I sewed this project yesterday ...
wrong hoop for embroidery. please check hoop and restart". I KNOW I have the correct hoop in the machine. I even tried programming it for a larger hoop than necessary and trying the corresponding hoop
Question about Husqvarna Sewing Machines
...wrong Hoop size, use another hoop" . In both instances it is the correct size hoop.It will not sew the design (on either machine) in the 150x240 hoop, even though the screen icon tells me the design ...
...tHE HOOP WON'T MOVE WHEN IN EMBROIDERY MODE. THE NEEDLE KEEPS GOING UP AND DOWN BUT HOOP DOESN'T MOVE. WHAT IS WRONG? THIS IS ON A VIKING#1+ try pulling the emb unit out and pushing it back in ...
...my viking rose and then it beeps. What does this mean? Refer to your manual, it could mean the hoop is not making contact with the sensor or you are using the wrong size hoop for the selected
Question about Husqvarna Sewing Machines
...wrong hoop - rehoop and start over. Tried several times to no avail. It sounds like the design was created using a larger hoop size. You can select different hoop sizes in your setting see attached ...
Question about Husqvarna Sewing Machines
...of the machine and noticed it was showing the wrong size hoop attached! I picked the correct size for the hoop I had attached, and viola! - message gone! and I was able to continue on with my
Question about Sewing Machines
wrong hoop. I've tried repeatedly to start again, but keep getting the message. What's wrong? Possibly the hoop is just a tad too small for your design. The hoop needs a certain degree around the edge
680 questions posted
Usually answered in minutes!
760 Questions
372 Questions
252 Questions
263 Questions
235 Questions
