Pfaff 2058 Voltage switch New Pfaff 2058 -- fresh out of the box, and we can't get the voltage switch to move to 120V from the 240V setting. The switch is at the bottom of the machine. Do you know how
Question about Juki Sewing Machines
... My oil level is at low. Is this the problem? Thanks. oil lever is not revelant. sounds like on off switch is faulty take apart and jump around switch. got a friend with a meter. they can tell if ...
Question about Singer Sewing Machines
I dropped my feed dogs on my 7470 and can't get the feed to go back up. I keep switching the switch to lift them up, but they won't go back up. I dropped my feed dogs on my 7470 and ...
Hello When the main power switch is turned on, Hello When the main power switch is turned on, the sewing machine light goes on but when the foot switch is depressed, the machine does not operate. I ...
Question about Husqvarna Sewing Machines
My Husqvarna Designer 1 starts running when I turn it on with the switch. It will not quit running until I turn the switch off. I'd be guessing that the foot or knee switch is stuck in the on position
Question about Sewing Machines
How do I replace power switch on unidentified sewing machine? Um, unless we actually have experience with your particular machine, how can we offer specific answers? In general: Disassemble machine ...
...930 my sewing machine has stopped zigzagging everything is set correctly according to manuel 1. The switching pawl (lever on the top cover that switches from zigzag to cam patterns) may be engaged in ...
Question about Baby Lock Sewing Machines
Message says to lower pressure foot but it is already down There is a little switch up behind the tension unit....when you lower the presser foot a lever moves, one side closes the tension discs, the ...
Safety Switch issues, E302 I'm unsure how I'm suppose to position this safety switch. Manual says 2-3.5mm from desk, I get error 302 on display unless it's touching the desk. Like, pressed in touching
Question about Brother Sewing Machines
...not feeding through...make sure the feed dogs were not accidentally lowered. There should be a switch/lever to raise and lower feed dogs. May have to remove extension tray/table to have access
680 questions posted
Usually answered in minutes!
760 Questions
372 Questions
252 Questions
263 Questions
235 Questions