Singer Featherweight 132Q Mechanical Sewing Machine "bobbin not turn" Questions

...Although your machine may be different. Also, make sure your bobbin case is firmly seated in the hook and it is latched in place. Sometimes, if it is not firmly latched, it will not turn as you

...bobbin turn? And, how can I fix it? Consult your owner's manual. It sounds like possibly you don't have the bobbin threaded in the bobbincase properly. The bobbin must spin (either clockwise or ...

...bobbin will not turn Check the belt inside,might had came out or broken.Thank you. Check to make sure that the bobbin is secure on holder. Usually you will a click when you push down. Sometimes the ...

...turn bobbin does not move when it is running is the bobbin in the bobbin case correctly?is the bobbin wound correctly?try taking the bobbin out & turning it the opposite waylet me know if any of ...

. Thread the bobbin and put it on the bobbin spindle on top. Push the bobbin and spindle to the right. Turn on the machine and spin it up. The bobbin spindle should turn and the machine should not sew

...turn the bobbin over see if that helps or bobbin case is not inserted correctly 2. Lint has collected in the bobbin holder 3. The bobbin is damaged & doesn't turn smoothly 4. Lower thread tension ...

bobbin thread. Step 1: Turn the handwheel counter-clockwise until the needle is in its highest position. Raise the presser foot lifter. Pull the slide plate forward and remove the empty bobbin. Step 2

turn in bobbin case. What gives? If you turn the handwheel, can you see a metal ring rotating around the outer edge of the bobbin case? If not rotating, broken gear or timing belt off. If that ring is

...turn up enough to allow the bobbin case to be inserted and sit at the correct angle. I just bought this machine and today is the first time using it. Any idea what is wrong? I suspect the "housing" ...

sewing machine not cars Bobbin thread bunching up try changing the needlerethread the machine top & bobbin make sure to use every thread guidemake sure the bobbin is turned the right direction in ...