presser foot stopped working I turned presser foot stopped working I turned my machine on put my foot on the presser foot and my machine said E1 and it just wont run Did you connect your machine then ...
...presser foot lever wasn't lifting the presser foot. i unthreaded the machine and took off face plate to get a better look, just moving the presser foot lever and rolling the wheel ...
...presser foot". Last week the machine was working fine. I have shut the machine down disconnected the embroidery attachment T basically started from step one with the same results....help there ...
...come to a thicker section, stop with the needle down, lift the presser foot and place a folded scrap of fabric under the back of the foot to keep it even. Lower the presser foot and continue
Question about Janome Sewing Machines
...presser foot up, rotate tension selector to 4. Then move presser foot down (this engages top thread tensioner). Make a slow steady pull of the top thread. Compare tension to when foot was up (no ...
Question about Sewing Machines
...presser foot that caused the screen to beep and blink on and off. When the screen indicating the presser foot was up stopped working I have had no more problems with run on. Is there a connection? ...
...presser foot and turn the tensions to zero. Start threading with the upper looper, making sure the loopers are not crossed. The upper looper is the one that appears to be taking the thread toward the ...
Question about Brother Sewing Machines
...machine The stop start button on my innovis 1200 wont change from red preventing me from sewing The start/stop button won't work if your foot control is plugged in, or if your presser foot is
Question about Bernina Sewing Machines
...presser foot lowers but the red light does not come on. Hi, You will usually have to unplug the foot pedal if you want to use the start/stop button. Have you disconnected the foot pedal? That may be ...
Question about Sewing Machines
presser foot of my sewing mashine pfaff 2056 is stopped working. Where can be a problem? The presser foot doesn't work Your cam lever is probably broke. I'm not exactly familiar with
235 questions posted
Usually answered in minutes!
760 Questions
564 Questions
372 Questions
252 Questions
263 Questions