...mode & I have forgotten how to change to rolling hem mode http://content.janome.com/userfiles/file/inst%20book%20634D.pdf Change the needle plate setting knob to rolled hem, starting on p. ...
...rolled hem on my Janome Mylock 234D overlocker (it's old). Can you advise settings please? I have the plate for the rolled hem, I have taken out one of the needles and have it set on "R" on the side ...
...rolled hem. Machine belongs to a friend who recently moved and the instruction manual has gone missing. Thank you! narrow 3thread seam, so remove left needle. loosen top looper tension to 3 or 2, ...
...rolled hem on a singer ultralock l4sh654 and what is the lever by the plate for? Rolled hemming on any overlocker is usually achived the following way. Right hand needle only. Blade over to the right ...
Question about Janome Sewing Machines
...needle plate setting nob on the janome mylock 504d overlocker Push blade from right to disengage...slide roll hem ****** forward...reverse operation to return to ordinary sewing.It is covered in the ...
...rolled hem with 3 needles...tension too loose. Rolled hem would be one needle and two loopers, is this what you meant? Make sure you move the blade to right so that you are cutting wider than the ...
...rolled hem). Loosen off top looper and tighten up bottom looper so the bottom looper is up tight against the needle thread on the underside. Test serge to get the stitch right, then turn the stitch ...
...rolled hem stitch. i don't have the foot or needle plate since i bought used and no one can find the parts i need. Any suggestions? where can i buy a new thread tree for my 1034d brother overlocker ...
...Rolled hem - most overlockers of 3/4 variety will also do a rolled hem; however, I can't actually confirm if this model does or not. But look around for a retractable stitch ****** in the ...
181 questions posted
Usually answered in minutes!
760 Questions
564 Questions
372 Questions
252 Questions
263 Questions