White Sewing Speedylock 1600 Mechanical Sewing Machine "thread breaks zig zag" Questions

...zig zag.  Please look at page 40 of your manual for information.  As for needle breaking check to make sure your need is the correct one for the thread and fabric.  Also make sure your ...

Thread frays and breaks when sewing and embroidering. i HAVE BEEN HAVING A PROBLEM WITH MY THREAD FRAYING AND THEN IT EVENTIALLY BREAKS ESPECIALLY WHEN I AM USING MY ELASTIC ZIG ZAG. Make sure that ...

Thread breaks when zigzagging but straight stitch ok Check that the bobbin thread is not pulling the top thread down when zig-zagging. If so, the bobbin tension may be too tight.

Also, there ...

...zig-zag. A stretch stitch uses a lot of thread, takes a long time to stitch, and is a bear to rip out. Really, all you need is a stitch that will stretch with the fabric and not break the

...thread. Test your zig-zag on scrap and pull on the seam to make sure the thread does not break. The more the fabric stretches, the shorter the stitch length and the wider the zig-zag. You may also ...

thread, it's breaking and bending the needles.. I know it has something to do with the timing and what makes it slip out of time? If you have a zig-zag machine check to see if the needle is set to the

...thread breaks if I stitch really fast. If you have to use that thread, you may try sewing slowly. One more thing, when was the last time your machine was serviced? This can make a huge difference if ...

...breaks on my pfaff 2140 when lowering the needle it slides to the left a little instead of going straight down, i was on zig zag when it started breaking needles. check that the selector button is ...

zig zag approx 1980. Haven't used it in years. The thread keeps breaking as I sew. Must be threading it wrong. Help please You may be right about the threading, but there are other reasons. First, OLD

...thread "popping," set the stitch length shorter and use a zig-zag (perhaps even widening the stitch width will help).

To help prevent missed stitches, be sure to install a brand new needle and ...