White Sewing Speedylock 1600 Mechanical Sewing Machine "disengage needle" Questions

disengage the needle I am trying to thread the bobbin, but I can't disengage the needle and getting the bobbin to spin Depending what brand and model of sewing machine it is, you can usually disengage

...disengage the needle bar). When finished bobbin winding, be sure to tighten the knob (clockwise) to activate the needle bar. Loading thread on the bobbin old Kenmore sewing machine Here's the method ...

Singer Magic 9 - How to disengage needle? There is a little button to push by the scissors symbol. Push it and it will make your needle either rise or fall. When it is up it is disengaged.

...The days of turning a wheel to disengage the needle are pretty much LONG GONE. 2. Put your bobbin on top of the machine where it goes and slide it to the left. This action disengages the

Bobbin clutch just spins I have threaded the bobbin correctly, disengaged the clutch, and all it does is spin around. Any ideas? Thanks Gerry Clutch is disengaged only for winding thread onto the ...

...needle thread somehow disengages, a few skipped stitches occur then the stitches continue for another few inches before all threads disengage completely. I have rethreaded repeatedly, cleaned lint ...

...Disengage the Needle action. This is a common area for malfunctions if the Clutch slips or does not tighten enough to keep the sewing assembly moving. WARNING: Over tightening a plastic Clutch hub ...

...disengage the needle to wind the bobbin. i need help with my Jones 936. No instructions and i can't figure out how to disengage the needle to wind the bobbin. Please refer to the attached ...

...disengage needle for bobbin winding? Pfaff tiptronic 6270-suddenly I can't wind a bobbin because the release disk inside hand wheel does not disengage the needle when turned counter clockwise. Did ...

...needle movement. To disengage the bobbin winder and sew, turn the inner wheel clockwise as far as it will go. This should engage the sewing capability and it should work either by hand rotating the ...