Yamata FY101-1A "needle wheel" Questions

Ad

Question about Singer Sewing Machines

1 Answer

needle hits the wheel under bobbin My needle is hitting the wheel underneath the bobbin. It's as though the wheel is not turning in time with the needle lowering. Before I realized what was ...

Ad

Question about Janome Sewing Machines

1 Answer

...wheel is not moving the needle at all Hi I was unable to move the needle at all using the hand wheel so was unable to check the alignment of the needle as you spoke of Check the hand wheel. There ...

Ad

Question about Sewing Machines

1 Answer

...wheel turns but the needle does not move. hi there, push or pull hand wheel clutch to engage motion of needle and shutter. if not check belt on downside of hand wheel open cover motor,loosen bolt ...

Question about Yamata Sewing Machines

1 Answer

...wheel towards you until needle at lowest position, watch the rotating hook, as you turn hand wheel slowly to raise the needle 3/16" the hook should be exactly behind the needle and be just above the ...

Question about White Sewing Sewing Machines

1 Answer

...wheel disconnected the needle bar from the motor so you could wind the bobbin without running the needle up and down. It sounds to me like your machine has the same feature, but resistance on the ...

Question about Sewing Machines

1 Answer

...needle, turn your hand wheel if still locked up or stiff. Remove your needle plate and remove all your threads both upper and lower. 4. Clean your bobbin area using a brush take a deep breath then ...

Question about Brother Sewing Machines

1 Answer

...wheel forwards until the needle is bottom dead center.- Turn the hand-wheel forwards until the needle raises 2.2mm from bottom dead center.- The Hook on the shuttle should now be directly behind the ...

Question about Yamata Sewing Machines

1 Answer

will not go up and down. Do you have any idea what could be the matter? I really appreciate any advice you can give. Thank you. Tighten the inner knob on hand wheel to make the needle move up and down

...or down. I have to move the wheel to get the needle up. Make sure you tightened the smaller wheel in the big wheel after making a bobine, if it is loose it deactivates the needle movement. Good luck

Question about White Sewing Sewing Machines

2 Answers

...needle to operate. This smaller wheel is needing to be in the loosened state to wind the bobbin. The needle should not go up & down then. Just hold the outside wheel & tighten the inner wheel. This ...

Not finding what you are looking for?
Sewing Machines Logo

38 questions posted

Ask a Question

Usually answered in minutes!

Top Yamata Sewing Machines Experts

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66824 Answers

Kardoc

Level 3 Expert

7501 Answers

ADMIN Eric
ADMIN Eric

Level 3 Expert

39358 Answers

Are you a Yamata Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...