Minolta EP1083 CS/PRO Copier "adf door open fix" Questions

...adf door, remove connector, remove T10 screws, lift the adf mechanism, remove the paper, observe why paper got strucked, shoot the problem, clean the mechanism & sensors with cloth, fix the ...

My HP laser jet keeps displaying "ADF door is open" and this stops me from performing other functions (copying , scanning and faxing) . Please what do I do to fix rhis Which HP Laserjet do you have?

...ADF/Scanner up. Open door "C" just below it. Lift orange photoconductor lever up to release photoconductor. Lift photo conductor up towards you. Inspect for jammed paper and remove if necessary. ...

...door forward until it snaps into place. Step four: Clear the jam from the automatic document feeder (ADF) Use the following instructions to clear the jam from the ADF. Lift the ADF cover. Gently pull ...

...samsung clx 3160nprinter to check the any papper part .to clear the papper jam then will be the adf scaner sencer hang.so you can change the adf paper senser or correct fix the senserliver. best ...

...door back down and then shortly got the error message. Pressed ok and the message won't go away. I just got that message and was a little disheartened by the helpless feedback. Check all areas of the ...

...ADF door. You will see the mentioned actuator in the middle, behind a long steel plate. That plate has 2 screws on the front, nearby where the mentioned triangle plate was. If you take that 2 screws ...

...door forward until it snaps into place. Step three: Clear the jam from theautomatic document feeder (ADF) 1. Openthe cover of the ADF. Figure 3: Open the cover of the ADF 1. Gentlypull the paper out ...

...door doesn't open don't push it. With the flash light inspect every single inch where the paper runs. Probably you did this before, doesn't matter, do it again. You are searching for small piece (s) ...