GX-6750 When typing and ribbon does not advance. The ribbon is new. Any ideas. Thank you, Gail The ribbon doesn't advance at all? Try turning the ribbon by hand. If it is really hard to turn, or doesn
...Ribbon Not Advancing I have an IBM Selectric II. When I replaced the ribbon recently, the new ribbon will not advance. If I advance it manually, it will type until the ink on the ribbon wears off. ...
...advancing. Thanks in advance! If this takes a selectric II ribbon the Spiked driver may be gummed up. Remove the ribbon, find the latch that holds the ribbon mech. open, release it the ribbon drive ...
How do I make ribbon advance? I have installed a new ribbon yet the ribbon will not advance at all & I wind with a small hole in the ribbon and of course nothing on the paper! Help! check to see if it
...AX-12M Key does not hit the page. It makes the movement but nothing is on the sheet. It has new ribbons. Is the daisy wheel locked in the forward position? Pull the black lever back, away from
...or could I have replaced it wrong? Ribbon is wrong replacement? Try removing the ribbon, advancing it a foot or so by hand. Install it, mark the feed wheel type and see if it is turning. ...
Ribbon will not advance fully making letters overlap on the ribbon, so the next letter comes out light. Is there an adjustment for ribbon advance. We have looked all over on the boards and could not ...
Question about Lexmark Office Equipment & Supplies
Selectric II- changed the ribbon, new ribbon won't advance the new ribbon won't advance while typing The ribbon is probably not threaded to the lift of the white slacker finger just left of where it ...
Question about Brother Office Equipment & Supplies
I just replaced the typewriter ribbon my Brother ML-100 typewriter; however, it does not advance properly so typing does not appear on paper. What is the problem? Take the ribbon off, see if it ...
ribbon does not advance? The ribbon does not advance - I have tried a new ribbon but it seems to just keep typing over the same spot. I need to advance it manually. You may be in the overstrike ribbon
44 questions posted
Usually answered in minutes!
41 Questions
18 Questions
28 Questions
25 Questions
14 Questions