GE WJSR2070B Top Load Washer "cycle speed" Questions

speed spin cycle. Diagnostic tests return no error codes and run through all the cycles, including the high speed spin cycle. But when using any of the washing settings, washer does not perform higher

...speed agitate. No error codes. Cycle completes, but will tear any delicate clothes up. Speed Queen AWN542 using the delicate cycle. Provides a brief wash, 3 minute pause, quick agitation, then slow ...

...a high speed spin at the end of a rinse cycle, wait until the spin has finished on that cycle and manually set the machine for a high speed spin or a second rinse and spin on the high speed

...cycle is the slow speed and the spin cycle is the fast speed. So if the problem is only the spin cycle then it could be transmission problems. BUT since the transmission is normally a sealed unit on ...

...speed is slow whine the cycle of program reach to drying stage the speed of rotation is very low and the clothes still wet after finishing the program cycle. call the technician as the program is not ...

speed queen washing machine leaking in spin cycle? speed queen leaking in spin cycle? A washing machine that leaks only during the spin cycle often has a leak in the main drain hose.

...just put power on and without selecting a cycle, push the spin speed selector button until a low speed comes up (should be about a 14 minute display) then push start to do a pump and spin only

...cycle with the high speed spin. If you are and it continues to spin at the low speed then your controller is most likely at fault. Your gearbox could be bad too but it usually complains with a lot of ...

...If so the SPIN cycle is too less or there is less action or speed in the cycle, check the motor speed, check the capacitor to the motor, the spindle friction - if so reset the spindle and

...is about a 2 to 3 min. delay for the liquid soap dispenser to fill up and disperse the soap into the washer tub. After that short cycle is complete the fill cycle engages and fills at normal