GE WSXH208A Front Load Washer "tub assembly" Questions

...tub shell assembly. Normally need to replace the inner basket/shaft assembly and the outer shell with the tub bearing. check out for this link ...

...and aluminum and detegent don't mix) and the spider assembly has broken. The drum has likely wobbled enough to wear a hole through the tub. You need to replace the drum and spider assembly, and

...tub assembly that has the included bearing? Thank You be sure that the tub is moving around with out the outer tub moving....could be a motor controller problem.....but heres the part#s tub ...

...gets very noisy. The tub bearing is pressed onto the outer back half of the tub shell assembly. Normally need to replace the inner basket/shaft assembly and the outer shell with the tub

...tub shell assembly. Normally need to replace the inner basket/shaft assembly  and the outer shell with the tub bearing.  Sometimes the inner basket support will crack, this can ...

outer tub assembly. It is a major job to overhaul a front loading machine, requiring outer tub assembly, water seal kit and possibly tub gaskets. If not under a warranty it is not economical to repair

...the complete tub/drum assembly from the washer----then splitting the outer tub in half to replace the inner drum and bearing assembly. Cost for parts will be excessive and not worth the

...to replace the drum assembly along with the bearing assembly. If you decide to do it yourself, you will need: The rear tub assembly which includes the bearings The tub seal Drum assembly Good

...bearing be cleaned up prior to inserting the new spin basket assembly? What if anything should be used on the gasket between the front tub and rear tub when reassembling the tub? Thank you wise