GE WSXH208A Front Load Washer "tilting panel door jam" Questions

Ad

...machine be back tilted by a 1/4 bubble, then you have to take two matchbooks and jam them between the door panel and kick panel on the right hand side. once you install the new feet you should be ...

Ad

...panel ( this will normally fill a small saucepan half way when machine is level which is the best way to drain although you will be using a cellulose sponge to soak the water from the floor rather ...

Ad

Question about Hotpoint Washing Machines

1 Answer

door and spin the drum by hand. Does it move OK? i.e. it isn't jammed. Does it spin really really well like there is no resistance at all? Possible snapped belt. Pull the washer out carefully and make

Question about Whirlpool Washing Machines

1 Answer

...panel below the door. If you peer in there with a torch, that missing sock might just be within reach with a pair of pliers or some kind of hooky thing. But take care, if the pump is jammed the ...

Question about GE Washing Machines

5 Answers

panel, loosened screw from a seal ring on the rubber flex hose going to a 4" square plastic housing. Reached down inside and found a ton of lint (probaby a 2" balls worth) jamming outlet. Removed lint

Question about Washing Machines

1 Answer

...door if it'll reach. Check the filter unit for blockages. Filter generally located behind a panel at the foot of the machine.Some are obvious like little square hatches and some are hidden behind ...

Question about Bosch Washing Machines

5 Answers

...door lock opening pull rod, and a drain line (?)- Looking through some holes in the front panel I saw some water on the bottom of the washer... but I spent a lot of time with the pump cleaning it out ...

Question about LG Washing Machines

1 Answer

door lock if there is any water still left inside. Following are my complete and hopefully 'coverall' pre-typed guidance notes for checking both the drain motor filter and the drain motor ;-0)

Question about Washing Machines

1 Answer

door open to empty and clean the filter? Believe it could be jammed pressure switch or blockage so need to know where to locate Thanks f-05 usually relates to either the pump being blocked or the sump

Not finding what you are looking for?
GE WSXH208A Front Load Washer Logo

1,215 questions posted

Ask a Question

Usually answered in minutes!

Top GE Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Virgil Watts

Level 2 Expert

267 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

Are you a GE Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...