Question about Siemens Washing Machines
coin or a metal zipper clanking around in the washer. I do not hear it during spin and it has only been doing it for a few weeks. I have checked the tub and have not found anything loose. It even does
...coin-trap (the circular cover on the pump) and remove everything from in there and your problem should be resolved. Please do it yourself because a technician would want $100 to do that. Good luck
cover to the pump trap, and then we got a headband, $2.17 in coins, a 1/4 pound of lint, and 3 rubber bands. And now all works fantastic. THANK YOU, Fordegirl!!!!! I was just about to call a repairman
...removing the drain hose from the standpipe and pulling a vacuum on it. This will minimize any mess you may have to clean up later. If your model number differs from the one you posted this question ...
... Don't rely on Sears service -- do it yourself! It's probably just a stopped up pump filter or "coin trap" you can clean it out yourself by following the instructions here: Front Load Washer Wont ...
...trap is AWESOME!! Worked like a charm. One thing is for sure, there is alot of water that comes out of there so make sure you have PLENTY of towels. Beware though, the cover plate is a pain to put ...
...cover (held on by just 2 screws). This gives access to the drain pump and sump assembly. Using a flat bladed screw driver I removed the hose clip securing the sump assembly to the main drum outlet. I ...
coin trap door now - it makes the job of removal and refitting the front panel easier. Remember to put a tray underneath! Unplug the ribbon connector for the front panel from it's socket and the clips
...trap and hooked it up. Free washing machine just for a little surfing on the web and visiting your site. Thanks! Tried this and it work perfectly......THANKS Same thing here. Thank god i searched the ...
1,215 questions posted
Usually answered in minutes!
992 Questions
371 Questions
398 Questions
323 Questions
255 Questions