GE DBXR463EBWW Electric Dryer "idler spring switch" Questions

Ad

...off. Check for spring tension in idler pulley. also check power cord terminal block for voltage at the prongs. you may also have a blown thermal fuse check it .. usually located on blower. see ...

Ad

Question about Dryers

1 Answer

...spring to the Idler arm bracket now, look for wear on the bracket to indicate where the spring hooks up, also look for wear on the frame and that is where the other end of the spring will attach. I ...

Ad

Question about Dryers

1 Answer

...spring, between the idler pulley arm, and the hole in the seam of the dryer case. (or if there is a belt-break switch, you put it around that) This is a bit tricky, as you need a strong right hand to ...

Question about Dryers

1 Answer

...spring for the idler wheel bracket... ALWAYS UNPLUG YOUR DRYER BEFORE ATTEMPTING TO DO ANY WORK ON IT. Sounds like your problem may be the belt may have slipped off of the idler arm pulley. If you ...

...spring loaded idler arm and place ribbed side of belt around pulley on end of motor with right hand before releasing idler arm to provide tension on belt. 5. Place front panel on bottom clips and ...

Question about Whirlpool Dryers

1 Answer

...spring activated idler bracket. The wheel mounts on the back side of it with the thrust washer installed first, and the tri-clip inserted last. Refer to the parts drawing for details. NOTE: Without ...

...on correctly there is probably a belt switch which is closed with a properly installed belt it is under the spring loaded idler pulley or maybe you for got to hook up the door switch hope this

Question about Maytag Dryers

1 Answer

spring that connects to the idler pulley moves quite a bit as the tub spins.... ALWAYS UNPLUG YOUR DRYER BEFORE STARTING ANY REPAIRS Your problem sounds like drum rollers have flat spots on them or in

...the belt is routed correctly? From front of machine, the belt comes down left side of drum, then clockwise around spring loaded idler pulley, then around motor drive and back to right side of

Question about Maytag Dryers

1 Answer

...spring clips in the right and left sides of this seam to release the top panel. Lift the panel & rest it against the wall. Reach in & remove the 2 screws holding the front panel to the side ...

Not finding what you are looking for?
GE DBXR463EBWW Electric Dryer Logo

131 questions posted

Ask a Question

Usually answered in minutes!

Top GE Dryers Experts

Cindy Wells

Level 3 Expert

6688 Answers

vince

Level 3 Expert

2530 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a GE Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...