...heat source called "Auxiliary Heat". This heat comes on automatically when the house doesn't get warm enough. The source of this heat is based on the region of the country you are in. North/Northeast ...
...heat source becomes your "emergency" heat. It could not be economy, since its only called upon when your primary heat cannot handle the load. and thats only at start up. once your within a ...
...source of auxillary heat is, should come on to keep you from feeling the cold air. When the heat pump is in defrost it is essentially operating in the A/C mode, that is why you will feel cold air if ...
...source of hot water. The purpose of heat recovery is to ASSIST with hot water production and reduce the current used by your water heater. The only time your AC heats your water is when it is working ...
...heat pump and the primary system is not working properly or it cant keep up so it turns on aux heat if it is could i suggest putting it on emergency heat and that should heat your house until you can ...
heat source is turned on, to temper or warm the air a little bit, for comfort factors and so we do not lower the house temp. During this time it is not unusual to see stream, and water dripping of off
...heat pump. 12000 Btu. When in the heating mode, I get the code E8 after it runs for 5 to 15 minutes. At that point it seems to run (at least the internal fan), but the heating aspect seems to be ...
...source, the compressor pumps refrigerant through the system to gather heat and moisture from indoors and remove it from the home. Heat and moisture are removed from the home when warm air from inside ...
...heat pump. Threw away the outside unit. Want to use the electric inside furnace/air handler as a shop heating source. I don't know how to wire in the thermostat which is 7801 thermostat. There are 5 ...
26 questions posted
Usually answered in minutes!
103 Questions
59 Questions
69 Questions
50 Questions
