...salt in the dishwasher but our area has relatively soft water for pools and hot tubs. Typically water has to be hardened in our area for proper PH levels. I do plan on checking the water pressure, ...
Question about Thermador Dishwashers
...water hose, and solenoid to salt dispenser, all to no avail. Any ideas what else could be causing our problem? Main control board is bad. Drain sequence is a power on test, Main board is not sending ...
...salt water will overflow out of the same place, this is normal this will start to work after about a wash or so if the salt is fine then check the heater on the machine, make sure its warming up etc ...
...salt, 1 cup of baking soda, and 2 cups of vinegar. Spread the ingredients around the screen, one at a time, at the bottom of the tub. It will begin to foam. When it has quit foaming, add 2 cups of ...
Question about Kenmore Dishwashers
...the 2ndPROBLEM IS VERY HARD WATER THAT IS CAUSING THE WHITE RESIDUE. RAISE THE TEMP ON HOUSEHOLD WATER TO 140 F AND ADD SOME SALT TO THE WASH CYCLE. LASTLY USE A LIQUID DETERGENT LIKE LIQUID
...water then increase the salt delivery a little - or even try a more expensive detergent to see if it makes any difference. Temperature- The single most important factor in getting good results is HOT ...
...water softener - big plastic lump in the bottom under the salt filler. The main fill solenoid would fail about every 2 years and I would buy a replacement directly from Zanussi for about £10. I ...
Question about GE Dishwashers
...salt bottle is topped up. you may also want to check that the spray arms are not all blocked up with debris. i would add that you also need to check your hot water temp coming in to the dishwasher.if ...
23 questions posted
Usually answered in minutes!
690 Questions
238 Questions
203 Questions
148 Questions
95 Questions
