...the weird thing is i get 110V on each side of the solinoid when wires are plugged into the solinoid prongs. when I remove the wires i only get 110V on one leg. the strange part is i do not get 110V ...
the dishwasher and remove the 2 prong connection to the water-valve solenoid (small, black, batter size). Test the solenoid for continuity; if bad, replace the entire inlet water-valve (cost about $20
...to line up with the plunger comming through from the float inside the machine. It also only has 2 prongs for connection and 2 holes for fastening. Could you help me find a replacement as it's a ...
...solenoid valve. http://www.fixya.com/support/r3907570-buy_appliance_parts_online Heatman101 the drain solonoid may be bad,it sits next to the motor and has a plunger that can move up and down,try and ...
...out of the trap and double checking that the solenoid actually clicks on and off (I twisted the prongs so they would fit into a standard 120 volt outlet) while cleaning and blowing on the hose
...voltage to the solenoid and burn it up. On the left side of the motor you will see it. A white 2 pronged harness going to it. It will have a white cam and linkage on it. You should be able to move ...
19 questions posted
Usually answered in minutes!
690 Questions
238 Questions
203 Questions
148 Questions
95 Questions
