...potscrubber-wont-fill-with-water.40359/ ...
...potscrubber 600 Thought I had a problem with the spray arm or pump because water was not flowing enough to spray the upper rack. But it turned out it was a simple part missing: the "check valve" that ...
...add some vinegar. Depending on your water as much as 4-5 cups per load. I have had a Potscrubber for close to 10 years and discovered that they clean beautifully as long as you don't skip the
water when it was not being used. Its a GE potscrubber 700. It takes about 3 days before we need to bail it out, so its a slow leak. I checked all the hoses coming of it to see if there were any clogs
...Potscrubber disher - water leaks out while filling GE Potscrubber disher - when the water comes in sometimes (very intermittently) the water overflows out all over the floor. There seems to be some ...
Question about GE Dishwashers
...water starts? Machine: GE Potscrubber 640 Check under the sink and make sure it is not shut off there. If there is water pressure to the unit then you could have a sticky inlet valve, no power to ...
...water out of it instead of letting it circulate in the unit. This is an easy part to replace, but for me, hard to find since my potscrubber is so old. Hopefully your units are newer and you can find ...
...Potscrubber dishwasher that I rarely use, but when I tried to use it recently, it just hummed but nothing else happened. When I tried to manually move the dial, water started to come in just past the ...
30 questions posted
Usually answered in minutes!
690 Questions
238 Questions
203 Questions
148 Questions
95 Questions