Broan-NuTone N-LS100SE Exhaust Fan Exhaust Fan "loose ceiling blades" Questions

...ceiling fan woobles on high and mediun speed as if it is going to fall down. model # is 44f 8 and serial # is az07123 Turn off fan, then check to see that all of the blade mounting screws are tight. ...

...ceiling fan from wobbling. Have checked for loose screws. The motor is balanced and have placed weights in different positions on the fan and it still wobbles. you still have a blade that is out of ...

...ceiling. Now I am to the point where I want to attach the fan blades, but the screws don't snug down. Without trying to attach the blade, the screws go in so far and seem tight - but they don't go in ...

...ceiling fan while it was spinning. Now when I turn it on the motor runs and I hear a clicking but the blades don't spin. Blades seem to be loose. Might have broken the flywheel if this fan has one. ...

blades are loose There are 2 screws, that hold the blades to the motor housing. Then 2 screws that hold the blades themselves

...ceiling fan? Two fan blades are loose and hanging lower than the others. I need to take them off to see if they are broken or have come loose from connectors.. Each blade should be held on by two ...

ceiling fan base gets loose and rocks and makes noise when running. can't sleep with it on. It seems the main stem attached moves back and forth loosening the base. U may also have a balance issue ...

...I suggest you take a look above the ceiling, if its a false ceiling and you can get to it. or else you will have to use a big flat head screwdriver to pry it loose and touch up the ceiling

...loose. You should even check the hanging bracket to make sure it's tight against the electrical box in the ceiling. After you do this you can try a balance kit on the blades. If the fan blades or ...

loose wires. What color wires should I look at for this problem? Is it possible the reversing switch has failed? Signs of a bad capacitor in a ceiling fan include: Fan runs slowly or not at all on all