...set if I have the stove on and try to cook on burner the flame is low cant boil water for noodles when oven is on any suggestions I have a Maytag stove Model #MER5875QCW The problem is it Takes for ...
...stove I got, someone had it set up for LP. I switched the orifices back to Nat Gas. I pulled the cap on the regulator and set that to Nat Gas also. Went to turn it on and nothing. First thing I ...
Question about Kitchen Ranges
...stove-oven. The hinges do not go down to lower the glass top cover over the burners. Need to buy the hinge set. No model so only generic help is available.
Is this ...
...stove.then all is disconnected so lift entire top off from hinged area and set upside down on table.transfer all burners to new top thats nexted to old one upside down also.when done reinstall.ive ...
Question about Hotpoint Kitchen Ranges
top burner, and it came on for about 10 minutes and then it went off by itself. Now, I have nothing at all working on this stove except for the little oven light still will light up. Please help, this
Question about Magic Chef Kitchen Ranges
set them aside. Unplug the stove. Each burner body has a numbers of screws holding it down to the top. Carefully remove the screws and unplug the ignition wire from each burner and set aside until all
Question about GE Kitchen Ranges
stove top only goes on "HI", cannot control it to lower settings. It seems to happen when the larger burner is used and eventually heats to it highest setting even when set to "LOW"
set the temperature to 'LOW' or 'MEDIUM'. I am not exactly sure what part of the stove top is malfunctioning and so do not know what part or parts I need to replace. Can someone help? Also, is there a
stove, you turn on the burner and set it to Lo. Then remove the knob and use a small flat blade screwdriver in the valve shaft (or an opening next to the valve stem) to turn the adjustment screw. Then
12 questions posted
Usually answered in minutes!
1,163 Questions
390 Questions
104 Questions
83 Questions
77 Questions