GE Spectra JGBP30 Gas Kitchen Range "flame height adjustment" Questions

Ad

Question about GE Kitchen Ranges

3 Answers

...flame height to coincide with the burner adjustment?. there are two considerations for burner height. 1) the gas adjustment screw on the knob and 2) the gas-air mixture to the burner. establish a ...

Ad

...is an adjustment near the venturi which is just past the control knob. This is a job best left to a gas fitter who will also adjust minimum flame height at the same time. Quick job, less than an

Ad

Question about Kenmore Kitchen Ranges

1 Answer

...use a slender flathead screwdriver. Turn burner down to low, insert screwdriver into knob shaft and rotate internal screw until flame is at "simmer" height. Can adjust each burner separately this

Question about Kenmore Kitchen Ranges

1 Answer

...flame height adjustment Brand new gas model 790.7885 Is it possible to adjust flame height on the surface burners? The "power burner" center when bridged with the back is a much higher flame than the ...

Changing to LP ... Oven flames very hi during pre heat Convert the gas regulator to LP. Then adjust all burner orifice outlets clockwise until the correct flame height is achieved.

Question about GE Kitchen Ranges

1 Answer

...HEIGHT This stove was just delivered on 3-4. I converted it to LP myself. I am a diesel mechanic w/ 20 years on various fuels including LP. I feel the burner flame heights are way too low. All are at ...

Question about KitchenAid Kitchen Ranges

1 Answer

...flame height. Would it be reasonable to adjust this so that the flames are higher and therefore provide more direct heat to a pan placed over it? Hello, It would seem like reasonable thing to ...

...knob to its lowest setting and then use the adjusting screw to set the minimum flame height. The flame must be robust enough that it can't blow out when you open a door or window and create a

...flame height on the range? The burner flame is too high on the range-top. I keep burning stuff! If the flame is too high then the gas pressure regulator on the range is probably bad. I say probably ...

...flame height between high and low. Compared to the other burners the oval burner provides a flame of "low" and one setting above low. The GE repairman could not adjust it higher without causing the ...

Not finding what you are looking for?
GE Spectra JGBP30 Gas Kitchen Range Logo

49 questions posted

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Ismael Rodriguez...

Level 2 Expert

184 Answers

Marvin
Marvin

Level 3 Expert

85223 Answers

Cindy Wells

Level 3 Expert

6080 Answers

Are you a Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...