Question about Yamaha Kodiak 400 Auto 4x4 ATVs
...shift lever will not move to the reverse or park position. It goes into high and lie ok as soon as your bike begins to high idle it will not fall into gear you probably will need to set your linkage ...
Question about Yamaha Kodiak 400 Auto 4x4 ATVs
...shift lever not to move into reverse or park The lever shifts up into high and low but won't go to reverse or park Check to see if one of the shifter rods behind the side pannel are bent.this usually ...
Atv Trouble Shooting will move in reverse,but no forward gears Worn,displaced shifting lever link to gear box so it missplace the gears shifting.
...shift to reverse, and the reverse light will not go on. Any help is greatly appreciated. remember on early models there was a safety pin that had to be held to switch to reverse,,,your 500 does this ...
...shift out of reverse. I tried this today and it worked. Pull the sideplate from the ATV so that you have access to the gear shifter assembly. Unbolt the gearshift assembly from the mounting bracket. ...
Question about ATVs
...shift lever or move it in an out of gear while holding the starter switch on. this will tell you it's the lever not the switch. look where your wiring goes into the side of the motor,,,if the neutral ...
...gear shift issues https://www.google.com/search?q=AIE+4-Cross+200+ATV%2C+gear+selector+adjustment Here is your manual in Czech! Copy and paste into Google Translate. ...
Question about Yamaha Kodiak 400 Auto 4x4 ATVs
...gear shift moves into forward and reverse but won't go into gear. I checked the lever and made sure it wasn't broken or anything. I also checked the drive belt and clutch and it all works fine. Any ...
Question about Yamaha Kodiak 400 Auto 4x4 ATVs
...move when shifted into gear forward or reverse the indicator lights seem to work fine just not going into forward or reverse if its a CVT the belt might be broke or worn. If a manual then it could be ...
62 questions posted
Usually answered in minutes!
4 Questions
2 Questions