GE JGBP28 Gas Kitchen Range "fix top burner wont" Questions

...fix that problem before, the oven heat is soficating the top burners, you will have to adjust top burners with the oven on, so that they will light by them selfs.Or put a shield under the cook top ...

...you trouble. Hi, sounds like a defective igniter. Replacing it will solve your problem assuming the burners you say light are the cook top burners. A defective igniter only affects the oven

...top is separate from the oven. When I turn on the burner(s) the clicking of the electric pilot light keeps clicking. All of the burners are making the same sound even after the fire comes on. I ...

...wont cook.Is there any one part that controls the heat on all four burners that may be bad?I would like to fix it myself,but need some troubleshooting tips.Any ideas? I would check to see if you have ...

...top will work when it wonts to and the middle burner dose not even work how do I fix this problem check your gas supply is on full. it sounds like a supply problem. another thought is a partial ...

...top the oven will continue to heat. However, when it reaches temp and shuts off, it wont relight when the thermostat calls for heat. If we turn the burner on again, the oven will relight and heat-up. ...

...works though. The stove top burners work fine. All was well for years until this morning. In short. It won't bake. I hope it's an easy fix...it's 11 years old. sounds pretty simple a bake ...

...top all ignite and work fine. The oven is not heating up I can see the igniter glowing orange but it wont heat up. What should I be looking for to fix the problem. make sure the hose is connected to ...

...fix this? I have a gas range - set oven to desired temperature - came on, when it reached desired temperature oven turned off - can not get it to come back on. Burners on top of range work okay. It ...

...top burners work fine. is there any way i can fix this myself without calling on the landlord, he is not a very nice person. If your microwave oven doesn't seem to work at all, check these: Fuses ...