GE Profile Spectra JGBP90 Gas Kitchen Range "oven sf" Questions

...on a frigedaire gallery range? SF means sabbath failure just hold the steam clean and self clean buttons both at the same time for 3 seconds the SF will go off and you can then use the oven as

3-5 seconds should show (sf) then press clean pad the display will then show (loc off)lock-out off then press start pad can only be set when oven is not in use JUst a guess but seems to be locked on ?

...SF. Tap the Delay Start pad until 12 shdn or no shdn appears in the display. 12 shdn indicates that the oven will automatically turn off after 12 hours. no shdn indicates that the oven will not ...

SF. Touch the BAKE pad. A two digit number shows in the display. Touch BAKE again to alternate between increasing and decreasing the oven temperature. The oven temperature can be adjusted up to (+) 35

SF. Touch the BAKE pad. A two digit number shows in the display. Touch BAKE again to alternate between increasing and decreasing the oven temperature. The oven temperature can be adjusted up to (+) 35

...oven self cleaning light keeps comming on, decided to put it through a self cleaning, hoping that would take care of it, but no... Unplug the power cord for few minutes. then plug it back to see if ...

oven, I see the temp setting at 350 degrees. As I press "+" button to raise the temp setting to say 400 degrees, The "+" button simply does not cooperate and I cannot raise the temp setting. I have no

SF. Touch the Bake pad. A two digit number shows in the display. Touch Bake once to decrease (-) the oven temperature, or twice to increase (+). The oven temperature can be adjusted up as much as 35°F

...SF code indicates that a power failure occurred when the range was set to Sabbath mode. For this range, you press and hold both the Oven Light and Clock buttons for at least 3 seconds to clear the ...

...Oven works too. Whirlpool Mod # SF 362 LXTS2 clean out the tiny holes in all burners with a tooth pick or needle the holes get clogged with grease an stuff these holes need to be clear an open good ...