GE Profile Spectra JGBP90 Gas Kitchen Range "burner cap stove" Questions

Ad

burner and black stove cap??? Please help. I just purchased a GE Profile stainless steel stove with black stove caps. The stove caps are stained with something that I cannot clean with soap and water.

Ad

burner cap from the problematic burner. Remove the sealed burner base and look for loose connections or disconnected wires. Secure any loose connections and reconnect any disconnected wires, reinstall

Ad

...to the ignition spark problems. If you take off the burner cap and head (for some models), the electrode will be visible. Clean off any carbon build up on the electrodes for better sparks. Cindy ...

Question about Kitchen Ranges

2 Answers

...burner caps. make sure that the caps and burners are correctly assemble. and make sure the stove is grounded correctly.. Do you flames have orange to yellow tips then there is a unburn carbon thst ...

burner cap is not set on PERFECTLY straight, the gas doesn't flow properly and will not ignite. Try lifting and replacing the cap back down on the burner and see if this solves it. actually my husband

...burner. Here's how to check your stove's electrical sources to make sure they're functioning properly: Make sure the stove is correctly plugged into a functioning outlet. Check the stove's circuit ...

Question about GE Kitchen Ranges

3 Answers

...properly sealed.Or the burner head and the caps are not correctly have been matched up. The pilot lights might be burned out and need to be relighted again on your gas stove or need to be

Question about Maytag Kitchen Ranges

1 Answer

Stove ignitors stay on. The ignitor goes off only when the cap is removed. This is happening with two burners at the same time. Hello edmontonDad, Welcome You said, Stove igniters stay on. The igniter

Question about GE Kitchen Ranges

1 Answer

...stove top parts, restore power and try to light each burner, one at a time. If none of them spark or light, then you need to check to make sure you haven't tripped a breaker for the stove or a GFCI ...

Question about GE Kitchen Ranges

3 Answers

...burner grate, cap, and head. Use a needle or paper clip to poke through the holes on the burner head. Re-assemble and try the burner. Remove the burner grate, cap, and head. Even if it looks clean, ...

Not finding what you are looking for?
GE Profile Spectra JGBP90 Gas Kitchen Range Logo

1,583 questions posted

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Cindy Wells

Level 3 Expert

6688 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...