GE Profile Spectra JGBP90 Gas Kitchen Range "board oven" Questions

...oven control board is malfunctioning. This board has relays on it that turn on the bake or broil elements. Sometimes, these relays can either become shorted or stick--causing whatever they control to ...

...Board The oven control board has a set of relays that turn on and off power to the bake and broil circuits according to the customer settings and sensor input. If the oven won't heat the problem is ...

board by unplugging the oven and plugging it back in, or you may need to replace the control board. Check the gas valve: The gas valve is responsible for regulating the flow of gas to the oven. If the

Board The oven control board has a set of relays that turn on and off power to the bake and broil circuits according to the customer settings and sensor input. If the oven won't turn on the problem is

oven control board in the range senses an over-temperature condition in the oven. This can be caused by a failed temperature sensor probe, a wiring problem between the sensor and the control board, or

...oven control board to where it is locked into power for the oven. 1.) Remove the bottom drawer to reduce weight. 2.) Put a rug on the floor in front of the oven, so when you pull the oven out it does ...

...board (also called ERC or clock). F2 - E1 Keypad cable unplugged F2 - E5 Cancel key drive line open F2 - E6 Cancel key drive line open F3 - E0 Oven temperature sensor (RTD) opened (upper oven, if ...

...board. Oven temperature is detected by the control board as it monitors the resistance through the oven temperature sensor circuit. You could have a failed oven temperature sensor, a wiring harness ...

...board and the oven sensor. I checked the oven sensor (1053 ohms at ~ 62F). But the aha moment - looking at the back of the relay board and seeing a number of soldering joints had dirt buildup. I ...

...oven control board. If it occurs before heating the oven, then it's the sensor, the wiring or the oven control board. You need to check the resistance at the temperature sensor. Unplug the oven/range ...