Question about Maytag Kitchen Ranges
...Stove / Oven Fault Codes Failure Code Fault Code Description Solution F0 Function key stuck Replace touch pad or if touch pad is part of the clock, replace the clock (ERC). F1 Defective touch pad or ...
Question about Jenn-Air Kitchen Ranges
...goes blank. sounds like you lost power to your stove. if you can't reset the clock, it needs to be replaced. in otherwords, the power outtage shorted out the clock. have a technician replace
Question about Kenmore Kitchen Ranges
...stove clock to stay on when I reset it Nov. 29, 2009 Kenmore range control panel not lighting up or working ... Dec. 26, 2011 Kenmore stove clock display issue ' Shop Your Way: Online ... Jan. 20, ...
...''F1'' Un plug the stove from the outlet. Give it time to reset itself, 24 hours if possible. Replug the stove, and you should be able to reset the clock and the beeping should have stopped
...to use self clean . How do I change the clock? Leo Before you replace the clock try cutting the power to the stove for 10 minutes. This will reset the clock and it will sometimes start working
...clock,turn on oven,set temp.or timer.Burners work fine. Unplugged stove and let it sit for an hour.Then plugged back in.The colon flashed on clock.Tried to reset clock but it went back to same do ...
clock is not displayed, oven light doesnt work the stove top lgiht with the electronic ignitioni reset the breaker but still can not get the touch panel to display anythingis this a big and costly job
...clock for the stove to get the oven and display to work. Upper control display does not function (clock, oven controls, etc.) What should I do? is there voltage going to the erc (electronic range ...
Question about Kitchen Ranges
Clock/oven/temp screen for a Jenn-Air electronic range #SVE87600 The display screen is blank and has been diminishing over the past few weeks. The oven and timer work but the display screen is blank. ...
Question about Maytag Kitchen Ranges
maytag mgr5750adw stove beeping .. No code display .. Pre heats to temp. then then turns off reset clock.. unplugged Change the electronic control/clock board and the oven sensor.
66 questions posted
Usually answered in minutes!
1,163 Questions
390 Questions
104 Questions
83 Questions
77 Questions