flame with small yellow tip). Having problem adjusting flame for oven/broiler use...flame is yellow. I have a GE Model Cooktop JPG337BEJ3BB and the burners are flaming to high. How do I turn them down
Question about General Electric Cooktops
...oven) light but the flame is about 80% yellow and I want to get back my blue flame. I cannot find anyplace to adjust the gas/air mix or whatever I need to do to adjust the pilot flame. Thank you! if ...
...oven The flame is regulated by the thermostat you don't say if it's too high or too low. Suggest you buy an oven thermometer available for a few dollars at most homeware shops, compare the ...
Question about Frigidaire Cooktops
Need some help on how to turn down the oven flames on a new stove Please help me step by step in how to adjust the flames lower its a new stove and the top burner flames are fine, just the oven is ...
Question about GE Cooktops
...oven and broiler has too much flame Hi I converted our nat gas GE JGBP32WEJ1WW over to LP. The top burners adjusted out fine but the oven and broiler are way to high even after truning the hex nut ...
...oven burner flames are not too big. They should never exceed the width of the flame spreader pan directly above the burner, in fact they should be less than half the width. You could also have other ...
Question about Whirlpool Cooktops
does model XFG371LVQ Whirlpool stove have air adjustment for top burners? I have a 2009 whirlpool model XFG371LVQ stove I cannot find an air adjustment for the top burners...The flame is orange, I ...
...flame height. Any suggestions on what technician should look for? LP fuel. Problem exists for all five burners. Stove is new. Use a manometer to insure lp gas pressure is correct. The regulator for ...
Question about General Cooktops
Large yellow flames after the oven is on and getting up temp After LP conversion, The top burners and broiler burner is great with nice blue flames. The oven burner however gets worse as oven heats. I
fame to low on my whirlpool stove fame to low You mean the flame is low. You need to clean the burner jet hole orifice and also check if their is a gas pressure regulator which you can adjust the ...
70 questions posted
Usually answered in minutes!
136 Questions
43 Questions
50 Questions
27 Questions
34 Questions