GE 30 in. JGP337 Gas Cooktop "surface burner knob" Questions

Ad

Question about Miele Cooktops

1 Answer

...surface of the board was charred beyond repair. To trouble shoot the problem, open the cook top and hook the burner in question to one of the known good control knobs. If it ignites, then it is the ...

Ad

Question about Whirlpool Cooktops

1 Answer

...knob or burner since before the burner stopped working, I used to be able to maneuver the knob enough to make the burner turn on. Knob is not engaged properly/does not fit properly on the stem any ...

Ad

...surface the "clicking" starter noise (that comes on briefly when you turn a burner on) keeps clicking about every 5 seconds. No burners are on. I have jiggled the flame covers, turned each ...

Question about Whirlpool Cooktops

1 Answer

...burner not heating up I have a whirlpool flat cooktop (Model: GJ8640XBB0). Of the 4 burners, 2 of the front burners are not heating up and the Hot Surface Light is always "ON" irrespective of whether ...

...burner 36" gaggenau has stopped working. I checked - the gas is on in the building. But the stove is suddenly dead - nothing happens when I turn the knobs. Hello. What the problem is a part in ...

Question about Whirlpool Cooktops

2 Answers

...Surface ) light to go out is to wiggle the temp knobs Our success has been to heat the elements to hot for about 5 minutes. Then let cool to reset temp sensor. Can cause the problem by turning a ...

Question about Jenn-Air Cooktops

1 Answer

...Replace the burner and receptacle and you should be short free. You may also need to replace the surface element switch too if it doesn't come on at all or stays on high regardless off knob

Question about Jenn-Air Cooktops

1 Answer

...burner. The next thing to check for are the ignition switches under the surface control knobs, the switches can twist and break and keep the spark module on and the spark keeps "clicking" even when ...

...has migrated into it. Remove the switch panel and check the switches for a loose or broken switch. There is a switch behind every surface burner knob. They must be seated firmly to work

Not finding what you are looking for?
GE 30 in. JGP337 Gas Cooktop Logo

27 questions posted

Ask a Question

Usually answered in minutes!

Top GE Cooktops Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Cindy Wells

Level 3 Expert

6220 Answers

Paul Carew

Level 3 Expert

3530 Answers

Are you a GE Cooktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...