On-site breaker panel routing I have a new GE 2009 stovetop and oven - has 4 wire and plug [red, black, white, gnd]. My old on-site panel has three breakers, one fifteen and two twenty-fives. Coming ...
Dry switches off new breaker I have a double 15 amp baby blue stab lock breaker dedicated to a dryer machine. Runs for 2 minutes and shuts off. Hotter dryer is quicker shuts off. What's the problem? ...
when breaker switch is powered on, and the knob is turned on, the light flickers once, with no heat from the element. After that there is no light or heat You should have this wired to 2 breakers. One
stove is tripping circuit breaker Two burners stopped working properly (only get slightly warm). Switched the coils to the other side and the other side is still working. Looked underneath and saw ...
what amp breaker do i need? what amp circuit-breaker do i need? 50 amp is code
GE Profile mod. PP975bM3BB all lights work Burner will not heat All lights work, they turn off and on but Burners will not heat You have lost half of the circuit in the breaker, the lights work on one
Question about Frigidaire Cooktops
Had power go off now er flashing on all burners can not reset It's possible that you had a surge when the power returned that scrambled the controller's brain. Try disconnecting power and reconnecting
power requirement 220v 20amp -- wire to unit should be 12x3 or 4? If you are running new wire to the cook top. You need to run 10x4 wire. The 12x4 wire is not large enough for the 220v. Also the 20 ...
tripping breaker electric breaker tripped, attempted to reset and observed flash in one burner element. Any solution? Replace the burner and receptacle and you should be short free. You may also need ...
33 questions posted
Usually answered in minutes!
136 Questions
43 Questions
45 Questions
50 Questions
27 Questions