GE Profile 26.6 cu. ft. Side-by-Side Refrigerator with Dispenser TFX27PRBWW "refrigerator going crushed" Questions

...Refrigerator is having the following "problem" - it has BOTH a cubed and crushed ice button. When either is selected (two separate buttons and when one is selected, it turns green), it will ...

Can't change dispenser selector The Crush option is currently selected and I can't change it to Water or Cube. I can push the Water selector maybe 10 times and it will switch for one second to Water ...

...crushed. We have emptied the bin and cleared the way thinking there was a blockage to no avail. Any suggestions.... check the arm on the bottom of the ice bin going back to the back wall of the ...

ice maker chute becomes jammed with snow and cubes are being crushed even if the cube option is selected You need to remove the ice bin , remove ( save ) the ice , and defrost the bin opening with hot

ice dispensor only dispensing crushed ice - not cubed I have a GE GSH22JFTA, everything works fine (light,water,etc) but the ice dispensor only dispenses crushed ice. I've tried defrosting everything,

refrigerator above (1996). When you move the front control to cubes, press on the dispenser pad,the actuator opens the delivery for cubes (I tape the door switch so the light goes out and the delivery

going front to back. That is the shift rod for cubes/crushed ice. Make sure it is free. Then look at the back of the refrigerator where the end of that rod goes into a square hole. There is a magnetic

...Crushed ice is the default position and the solenoid is energized to cube ice. Remove the dispenser cover by gently prying starting at the bottom going round and round a little at a time to prevent ...

WILL NOT MAKE SWITCH FROM CUBE ICE TO CRUSHED I CE remove bucket,empty into large bowel. inspect bucket opening,and be sure ther are no chunks of ice hindering movement of blade bypass mech. w/bucket ...

...Crushed ice is the default position and the solenoid is energized to cube ice. Remove the dispenser cover by gently prying starting at the bottom going round and round a little at a time to prevent ...