GE Profile 26.6 cu. ft. Side-by-Side Refrigerator with Dispenser TFX27PRBWW "auger ice bucket" Questions

...ice bucket, the auger no-longer seems powerful enough to push ice out. [NOTE: After a freeze-up (ice accumulates under ice bucket and all in ice chute), I always defrost and clean the ice bucket and ...

...ice until the auger freezes and won't turn any more..I noticed at the back of the bucket sliding track has a crack about 1 and a half inch on both sides...Is this what is causing the ice build up at ...

auger inside the ice bucket not turning - ice not dispensing ice is not dispensing. The auger at the back of the ice bucket is turning but the one inside the ice bucket is not. I had same problem. ...

Ice dispenser and auger will only work, when you push for ice, when the freezer door is closed, so by holding the light switch(s) in the off position with door open you can simulate door being closed.

...ice in the Auger at this time...but it all this works then future production of ice will fall out. Note...Usually the Auger Motor never fails. but the whole thing can get jammed with ice and not ...

...ice bucket or auger assembly from the freezer. Reach into the freezer compartment where the auger assembly normally would be. You should be able to see a "horse shoe shaped metal drive assembly" that ...

auger motor is frozen up, the ice bucket is broken or you need to dump out any ice, run warm water through the entire ice bucket, dry it out and try again with fresh cubes. My guess is the auger motor

ice the auger does not engage and no ice will come out Make sure the ice bucket is fully seated into the space below the ice maker where it rests, if not in all the way, the auger cannot engage and or

ice bucket back onto the hexagonal auger drive shaft. When activating the ice dispenser, I could hear the motor turning, but the auger shaft itself would not rotate. The cause was that the auger shaft

ice bin. Rotate the auger with your hand.If its hard then there is problem with auger motor.If the auger is not rotating fine then its faulty auger motor or the auger motor is frozen,if you notice ice