Question about Minka Dryers
...dimmer switch on the fixture Check for 120Vac cming into the light fixture, if its there, the problem is your fixture, the fixture switch, or the way you wired it into the circuit.at the light ...
...light fixture. Wired to Levitron combo three wall switch. Seems to work fine until the attic temperature exceeds 130 degrees (summer in Arizona!) Then both light and fan come on when either switch is ...
...light fixture - be sure to replace the ceiling box with one designed for use with a fan - as per electrical code. If the existing box had only 2 wires (or 3 counting the ground) that connected to the ...
...someone got a replacement light fixture kit and it's not compatible. Is there a possibility that you can adjust the angle of the light fixture, i.e. are there 3-4 small lights that can be
...light fixture? If it is a light fixture, you need to make sure that the box is sufficient to hold a fan. The weight is significantly higher than most lights and the movement makes it worse. If it was ...
light fixture would present. The constant movement can loosen a connection over time. Before we go any further, operate any speed control / light switch on the fixture itself to make sure they haven't
...light fixture (I don't know how closely this resembles your model, but bulb access is not immediately obvious on it either). I looked on top of the light section and found a #2 Phillips screw on the ...
Question about Dryers
...light fixture for my Encon ceiling fan Model # CD52? Another # on the UL sticker is E106510. The barcode scan # is 131-026586104406. I dropped and broke the glass light fixture for my Encon ceiling ...
...the three screws that hold the light fixture to the ceiling fan.... let it hang down and check to see if their are any loose wires, or bare wires that would allow it to short and kick the
225 questions posted
Usually answered in minutes!
437 Questions
157 Questions
101 Questions
