...ref stops cooling. No sound could be hear when plug to electical conv outlet.I lost already my manual. Any sugggestion to start troubleshooting? thanks_ric . Cut everything off for a few minutes then ...
...for aminute and then cuts FRE2422A. Motor runs for a minute and then cuts out. Have replaced thermostat IF THE MOTOR IS A BIG BLACK THING BEHIND YOUR REF. THEN IT IS A BAD COMPRESSOR. 800 TO
...check ur over loador replace it if deffective. the n observe unit.or try to relocate your ref. unit may the circulation or air is not good cause of trippng of compressor. or check your breaker if
why overload protector always cutting off and on? Hi, The overload opens to protect the compressor. It operates in relation the internal or external temp of the compressor, not pressure. With this ...
...ref 5 flashes on and off the whole time? Thanks, Alan Harris [email protected] [email protected] Alan if the power was off for less than 5 minutes the compressor high pressure went to ...
...the water line to the back of the fridge and connect it to the water valve of the ref. the valve will be behind the compressor cover, and is normally connected with a 1/4 inch compression brass ...
...compressor to cut off , when so much heat is removed from inside the ref . The property of refrigerants , is to attract heat , and since aluminum is a good conductor , the evaporator coils inside the ...
...compressor has a capacitor it could be bad but this is not a common part on ref. Even replacing the starter does not guarantee it will work most of the time the compressor is bad and if so its time ...
...ref doesnt cool Top of Form If there is no cooling at all , before we go further we must confirm the first step of confirming the compressor and gas pressure. So shut off the fridge and leave it off ...
3,777 questions posted
Usually answered in minutes!
927 Questions
305 Questions
304 Questions
262 Questions