Lakewood LAK707 Utility Heater "fan switch" Questions

Ad

Question about Dayton Heating & Cooling

1 Answer

...switch is not proving that the inducer fan is running. First check to see if draft inducer fan is running that will be the small black fan that is hooked to the vent pipe. If fan is not running then ...

Ad

Question about Cozy Heating & Cooling

1 Answer

...fan switch is touching the metal.. the fan switch is tiny (size of a dime) with two stake on wire conectors going to it... check to make sure the speed switch (looks like a dimmer switch) is sending ...

Ad

fan/limit switch it is possible the settings are wrong. Typical settings are: Fan Off-110F Fan On-140F High Limit-170F. If these are correct, you probably have a bad f/l switch. The bi-metal spring in

Question about Honeywell Heating & Cooling

1 Answer

...switch or the fan that needs repair? Thank you. remove the switch and test it with a meter on ohms or remove the switch and disconnect the fan wires and connect the fan wires to an extention cord to ...

...fan switch, Check above burners and you will see a lower limit switch and above that a fan switch. If you do not see a fan switch. The problem is blower control on board. You will have to replace ...

...for the board. fan limit switch Hi guys I have a Brivis wombat 120 and the fan wont turn off. I replace the control unit but still wont turn off hope you offer me some ...

Question about Goodman Heating & Cooling

1 Answer

...fan does not ? should i check the switch first then the blower motor ? The evaporater fan is likely disabled if the tamper switch on the removable panel is not in place properly (make sure any ...

Question about Nemco Heating & Cooling

1 Answer

Can I convert the ceiling fan and light fixture switch to individually controled switches only if there are two circuits going to the fan. or two switch legs going from switch box to the fan.

Question about Dayton Heating & Cooling

1 Answer

...a bad fan relay Yes but it could also be a sticking fan switch located on the heat exchanger. Replace the switch first, it's cheaper. Look for any bad connections, follow wires from fan to the

Question about Honeywell Heating & Cooling

1 Answer

...fan switch broken I believe I have a Honeywell L4064B2236 Fan/Limit Control. It has a white "manual fan on" switch on the bottom right of the switch which broke off. I was wondering if any other way ...

Not finding what you are looking for?
Lakewood LAK707 Utility Heater Logo

2 questions posted

Ask a Question

Usually answered in minutes!

Top Lakewood Heating & Cooling Experts

Paul Carew

Level 3 Expert

3808 Answers

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66949 Answers

Are you a Lakewood Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...