GE Profile JKP18 Electric Single Oven "control cooktop model" Questions

...control on it. Now there are 4 more screws that hold the front of the cooktop, unscrew those, disconnect the 2 wire harnesses at the connectors, pull the cooktop twards you and up and it will come ...

...the manuel! help!!!! look just inside oven door just below the cooktop/or look on top and just behind the rear control panel,or on back panel,or in lower pull out drawer of unit its one of those ...

...is on, oven will not operate, however cooktop will operate until display shows F1 and sounds alarm. frigidaire model #MEF352CGSC Your electronic oven control is bad and must be replaced. The

...cooktop will not heat up check the main power supply and make sure it is correct.depending on the model the only other problem would be a main control board.i hope this is helpful.would like to here ...

...cooktop unaffected. Beeping signal along with Error Code flashing in Display window. Need to know how to fix this problem F1 is a common error code indicating a failure of the oven control board (aka ...

...model 790.4671 that is 5 years old. The entire cooktop will not work. The oven, clock etc. are working fine. I have no error codes, beeps or anything, used it one day and it was fine, next day I get ...

...cooktop and oven don't heat up. Check for proper power (control panel is 120V, burners and heat element are 240V) You may have lost connection in one of hot wires causing the burners/elements not to ...

...cooktop works but the oven is not working properly the screen says e1-f2- how do i get help with that Hi. This code is in reference to a possible unplugged key pad. Use this procedure to address ...

...cooktop, model # 79046593500. None of the elements or the oven will heat up. The controls work, the red indicator light goes on, but no heat. It sounds like your Frigidaire made kenmore may have a ...

...control lock key. With the cooktop and oven off (use the Cancel/off button if needed), press and hold the control lock key for 3+ seconds until you hear the beep. This toggles the control panel lock. ...