GE JVM1340AW/BW/WW Microwave Oven "fix hole bottom inside" Questions

hole in the face of the microwave that appears to be for a screw. However, after reading on the internet from people with the same problem - it seems that this hinge is tac welded on the inside of the

...hole and squeeze the tool till it pops off.  I put one 3mm rivet on the top hinge and one on the bottom. No drilling needed on my Fridgidaire PLMV169DCd microwave.  I guess u could ...

...hole thru the microwave face and the hinge bracket if there isn't one on your model Agreed, this worked GREAT! Thanks again Mine is doing the exact same thing. The door is sagging. I think ...

...hole thru the microwave face and the hinge bracket behind it if there isn't one on your model There are plastic mounts inside the microwave which hold the door switches and onto which ...

fix or replace door handle that broke off...the bottom half of the handle is off. GE spacemaker xl jvm1339 You have to separate the door panels (as shown in the attached photo) and then you'll see the

...bottom) that broke off, it is possible to re-attatch it to the door if you save the broken piece. Drill a small hole the size of a small wire or nail you have lying around to make a splint - Cut the ...

...bottom of the door. The screws holding the handle on are not visible from the back of the door. How do I access the screws to replace the handle. GE Profile JVM2070BH01 The back of the door will have ...

fix it this way: - followed jamwillie's advice (except had to work with door in place because could not lift it off hinges on the JVM1190 model) - used heat gun to soften up the plastic trim to lessen

...fix? It only cost $100. Thanks. Sounds like part of the peg broke off and is left inside the recepter slot area where the sensor switch is. If it is the lower door plastic hook thing (inside bottom) ...

...shaft and not turning. my r-930ak sharp carosol is arcing inside at the top.I took the proctector off inside & has a small hole in it.where can I buy another one & will this fix the ...