GE JE1640 Microwave Oven "fan motor noise" Questions

Ad

Question about GE Microwave Ovens

1 Answer

...fan motor going? Check to make sure that nothing is obstructing the fan blade causing the noise, if not then the bearings in the fan motor are more than likely going out causing the metal on metal ...

Ad

Question about Microwave Ovens

1 Answer

...motor or fan noisy, once open fridge it make a loud noise then stops until I close door again, normal for 10 mins that starts all again??? could this be the motor or fan? your evap motor is going bad ...

Ad

Question about Whirlpool Microwave Ovens

1 Answer

...is detected it means the turntable motor is near end of life. If there is no change unplug microwave and remove top check the fan mounts tighten if loose, if straps are tight suspect the fan

motor that spins the fan next to the overhead light inside the microwave. when i disconnect the motor the noise goes away. How important is this little fan? That "little fan" is the Microwave "Stirrer

Question about Microwave Ovens

1 Answer

the bearings in the fan motor become clogged with dirt or just wear out. You must get access directly to the fan housing and spray the bearings directly. This may consist of taking off a couple panels

motor that drives the stirrer fan, that is cause the rumbling/rubbing sound? Could be that but there is also a motor for the turntable that may have bad bearings. For parts go to this site Search Over

...Fan Motor If the microwave is loud when running the fan motor might be Stirrer Motor If the microwave is loud or noisy the stirrer motor might be worn out. The stirrer is a metal blade which slowly ...

Question about Whirlpool Microwave Ovens

1 Answer

fan motor is going and it involves bad bearings or the lubrication in the motor has dried out. The fan is responsible for cooling the magnetron while it is running and is critical, I suggest replacing

Question about GE Microwave Ovens

1 Answer

...shaft or the fan motor bearings are shot. Repair is accomplished by replacing the blade or motor. If the fan is not operating correctly the magnetron will star to overheat and the oven will shut

...on funcion ..whats wrong? Noise may be due to turn table motor or cooling fan,watch and diagnose,if turn table motor is noise than replacement is solution,in the case of fan noise clean & oil

Not finding what you are looking for?
GE JE1640 Microwave Oven Logo

69 questions posted

Ask a Question

Usually answered in minutes!

Top GE Microwave Ovens Experts

vince

Level 3 Expert

2530 Answers

Cindy Wells

Level 3 Expert

6688 Answers

NOEL
NOEL

Level 3 Expert

8606 Answers

Are you a GE Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...