GE JVM3660 Microwave Oven "blowing light bulbs" Questions

GE Model# jvm1850sm1ss microwave has lost all power. The light bulb was not secured in its mount as it should be. When I took off the bottom panel the light moved, touched other metal and caused a ...

...bulbs at home depot or lowes when they blow, a lot of the time they take out the main board too, either blowing a trace off of the board or fusing the relay contacts together so you cant turn it off. ...

Lights under the microwave won't turn off One of the bulbs under the microwave burnt out (actually blew off the base). We unplugged, and managed to remove the bulb socket. we replaced the bulbs, and ...

...no power gets to the lamp It is common for the light circuit trace to blow out if the light bulbs shorted out when removed while energized. If the trace is good then there could be a bad light ...

Light socket is dead on my Maytag I have a MMV4205 Maytag microwave/hood. One day the bulb in the hood part burned out. When I replaced it, the new bulb would not work, though it is fine. Everything ...

Ewave over the stove microwave fuse blows when I Ewave over the stove microwave KOT-170SB fuse blows when I open the door. I replaced the fuse and works fine if I don't open the door. As soon as I ...

I HAVE A COUNTER TOP MICROWAVE MODEL #KOR611Q, AND EVERY TIME I PLUG IT IN IT BLOWS THE FUSE. I HAVE CHECKED ALL THE RECEPTICLES ON THIS CIRCUIT WITH A RECEPTICAL TESTER, EVERYTHING ON THIS CIRCUIT ...

...light failure often occurs when a bulb goes out and the filament shorts, or when the bulbs are removed or installed without first unplugging the oven from the power line. Either can cause such a ...

light worked, but now apparently is stuck on the high position - we have a high/low switch. Did some fry to keep the high/low button on high? Or, do we just need to have 2 bulbs back in the microwave?

fuse blow when door opens I would replace the light bulb. If the fuse still blows, then it is going to have to be the door switch.