GE Advantium SCA1001SS Convection / Microwave Oven "replacing wall hood lights" Questions

...Wall" and "Outer Case removal ".). And proceed as follows. 2. Open the door and block it open. 3. To discharge the high voltage capacitor, wait for 60 seconds. 4. Remove the three (3) screws holding ...

...hood blew out. When I took the cover off to unsrew the bulb, all the bulb does is spin like the threads are stripped. But when I turn the other way, it tightens right back up. Am i trying to remove ...

hood for JVM1430BD002? The first step is to unplug the oven before changing bulbs. I have a diagram at my site which helps you find & replace many GE cooktop and cavity light bulbs. It's at http://207

...replacing this lamp??? Thanks, JD They are indeed the same bulb, a 10W halogen. Care must be taken not to touch the lamp, as the oils from the skin will shorten its life. In many recent models, the ...

...hood light I already checked: My circuit 20 amp breaker Both ceramic fuses, about 0 ohms Check 1 thermal fuse, 0 ohms There is a second thermal fuse I am having trouble removing to check. What else ...

hood no power/panel display lights! Breakers are fine! YMH7140XFB1 model You should test the outlet. A hair dryer or toaster would be best to test the outlet "under load". If that's okay, I would then

...wall, or if yours is a counter top model, the outer cover (wrapper) will need to be removed. The screws you need to remove should be pretty obvious, and a special driver (such as a T20H Torx type or ...

...wall so you can remove the outer cover to replace the bulbs on top of the chassis, in the rear, or near the hood openings. This is a safety measure to protect the customer from line voltage and high ...

...hood fan has a clogged filter or restricted air flow in the duct work. It could also be due to spraying cleaners directly on the control panel / keypad instead of using a slightly damp cloth. Lastly, ...

...wall socket which didn't have a red circuit breaker button - in a different part of the house, and it appears to be OK. I only tried this test for a few seconds though because I wanted to ask ...