GE JES1039 Microwave Oven "cooking time tri tip" Questions

...cooking time ok, the turntable revolves ok, and everything appears ok - until I take the food out and find that it is still uncooked. I have tried various power levels and cooking times, but it makes ...

...time for something to cook it runs fine but it will not make the food hot HELP!!!!! the sides and top and bottom of microwave are warm but food is cold. tried heating frozen microve macaroni and ...

...,main board or the magnetron. You should try with a preset selection and if the microwave works then the fault relates to correcting the power to time settings. Check out with microwave cooking

the power button is not working,i do not use this button very often, less than 1 time a week. i have had the oven 3-4 years First try a hard reset.Unplug it a couple of minutes, then plug it back, set

time display area always shows "cook". The countdown timer works fine but no cooking action. When it counts down, the last "second" digit shows up faintly to the left of the cook time remaining digits

...cooking cycle. The food particle remained and every time the microwave gets used, this particle continues to cook until it turns into carbon. This can be as small as the tip of a pin. Carbon reacts ...

time lengths, usually less than 2 minutes. This occurs even though I never programmed the thing to do this. It is frustrating and downright spooky because when I try to cancel or stop the action a few

...time. My wife then tried using the oven, and it let her enter the cooktime, and even hit start. At which point the oven should come on, nothing happens, but the timer starts counting down like it's ...

I have a GE Sapcemaker XL1800. Last night when I went to push express cook for one minute all I got was a small roar and after the one minute was done, my sandwich was not heated. We tried it several ...

...cooking The problem was a "secondary switch" in the door. it got hot at some time and it made the plastic body of the microswitch melt or soften. over time the micoswitch contact inside the switch ...