...close the door and lift the door up and toward you.Install the new door. Make sure the wall oven door hinges are aligned to go into the rectangular wall oven slots. Place the hinges into the slots. ...
...getting an ample supply of power. If the power is on,but it does not work check to make sure the door closes and aligns properly.Microwave door switches have metal terminals on the end that make ...
Question about GE SpaceMaker Microwave Ovens
door open faster and look really close, you may notice the light, fan, and turntable coming on for a split second. That's perfectly normal. The relay on the control board must also be turned on before
close. The circuit is then not complete and the oven thinks the door is open. When this happens, the oven will not turn on the magnatron. When this happens, no heat. Do not touch the silver can in the
close the door, then there's a problem with a door switch or door switch mount. If it's intermittent or random, it may be a bad connection, usually on the control board or a loose fuse holder, or even
...door switch and it has blown the interior microwave fuse. Q - My microwave is completely dead. A - House fuse has blown or interior fuse inside the microwave has blown ( usually a part inside the ...
door a few seconds before the timer went off, it stopped working completely. I checked the main fuse panel and it was fine, so I suspect I've blown an internal fuse. There is a panel at the top of the
Question about Panasonic Microwave Ovens
...to prevent the oven from starting unless the door is closed completely. The switch or switches may be defective or misadjusted. Also, the door may not be closing properly to close the
Fan continuously runs, have to leave door open Will work if given a program, beeps when completed, but light does not go on when heating, and fan stays on after cycle completed Check the door switches
...close the door hard or it will not start if you just close the door it will not start The locking mechanism is not closing completely unless you slam the door because the plastic parts don't slide ...
4,203 questions posted
Usually answered in minutes!
Step 2: Please assign your manual to a product: