GE Spacemaker JVM1640SJ Microwave Oven "display normal run" Questions

display and the input from the keypad. Check you manual to see if it comes with a self-diagnostic (higher-end microwaves from Panasonic, LG and Jenn-Air come with them) and run it (normally kicked off

...on your own as it is dangerous - get a qualified tech. If the microwave has no power (nothing on display) then more than likely it will be a fuse. The one that I am referring to is normally found ...

...normal, but if you listen carefully you will not hear the low tone from the HV Transformer. Over my thirty years in the business I have re-soldered rather than replace so many I couldn't count. Next ...

...display works properly, however there is no heat coming from the unit. It has a somewhat louder than normal buzzing sound when being run. Any thoughts? Thank you in advance... You have a bad high ...

...display lights and if the bulb lights inside the microwave when you close the door and press start, then you probably damaged the magnetron. The magnetron is the part that emits those high frequency ...

normal position, the display began to flash and the unit quit when it was back in place. GE paid for the parts and I paid about $48 in labor. The magnatron and diode were replaced. Two other shops had

display, but it doesn't "run" when you press Start, then it is probably a door interlock switch. And if it runs and makes noise (especially if the noise is louder than normal), then it is probably the

gh7145xfq does not heat has power and display, sounds as normal when running, but no heating takes place Sounds like you need to replace the heating element.

...run "baked potato" setting. no functions operate, display screen functions normally. I unplugged the microwave for a few inutes, and let it reset itself. found solution on another site that ...

...normal? the new Fridgidaire range has nice bright easy to read display. MW otherwise works ok. richard l in Houston 10-24-2012 The owner's manual (here) does not mention that as a feature, so I ...