GE JVM1640 Microwave Oven "door needs held shut" Questions

...door is held in place with four tabs. If one of them tabs break it jams the button. When used in normal/non-microwave mode, the door opens when the temperature reaches about 170degrees, and will not ...

...HELD TOGETHER WITH PLASTIC TABS THAT LOCK BEHIND THE MAIN FRAME OF THE DOOR. TO GAIN ACCESS TO THE TABS, FIRST USE A THIN BLADE TO REMOVE THE CHOKE.( NARROW ROUND PLASTIC PIECE THAT SURROUNDS THE ...

...door to find the rack hooks melting. What would cause this to happen? Can I use the Microwave anymore? Quite often this is due to greasy build up on the inside of the unit, there will also be a mica ...

...needs to be replaced.  The instruction manuel mentions to replace the monitor switch when replacing the fuse.  Since I lost the manuel a long time ago, I asked at Lowes and noone knew what ...

door panels are held together by hidden hooks or catches that ave to be separated by a thin, strong tool such as a putty knife. I've attached a photo that should serve as a good example. Removing door

...door and it turns on. I can't cook or warm up anything. THe clock and timer works. I went through my manual and pressed and held a few of the troubleshooting buttons it says to do and it works.??? ...

...needs to be removed. Please unplug the oven first. Once it is apart, you'll be able to see how the door open button would press against the door open lever, which would then lift up against the door ...

...door and pressing start, loud buzzing and flash in oven Quite often this is due to grease or food particles stuck to the inside of the oven or stuck on or behind the waveguide cover. The waveguide ...

door it starts running am I suppose to program it before I use it Check if it has a button that says STOP. If so then press it. A cooking program may still be held in memory. Otherwise unplug the unit

...held the door closed. With this model you just pop a plastic cover off to access the latch. Very easy. The door hook was broken but the latch hook was ok. I was able to attach the spring to a square ...