All lights/controls function normally. 18 months old and little used. Q= my Microwave some time start and some time not; went push start swith it caming sound or click, click. thanks for your replying
Question about GE Microwave Ovens
...heating and turntable stopped working at the same time. When you start it, it sounds fine, but nothing heats. You can hear a relay or something clicking after about two seconds. The model number is ...
Question about Kenmore Microwave Ovens
...heating only. What could that clicking sound be? If any wiring on the control panel was or might have been disturbed, I would want to check that. It may be that something (like a sensor) did not get ...
SPORADIC HEATING my microwave sometimes makes a clicking noise when i press START. it sounds similar to a gas appliance lighting. when it does make that noise, it does not heat whatever is inside. ...
...sound ge microwave spacemaker xl1400 microwave heating normally,but when finishes, microwave makes rapid ticking noise that slows and stops after approximately 5-6 seconds There should be a buzzer ...
... Does not heat food. Turntable turns and it sound like it is working for a second or to and then it clicks and makes a funny humming noise. with out a proper diagnosis, i would have to believe your ...
Question about Sharp Microwave Ovens
...heating to be irregular It seems to work sometimes , but will keep making a clicking sound and you can see the lights in the house ever so slightly dim when the clicking happens. Sometimes it ...
Question about KitchenAid Microwave Ovens
sound coming from the control panel. It will click every 15-20 seconds. What could it be? The clicking sound would probably be a realy on the Circuit board. Do you have it set on Full power?? If it is
Kenmore 665.6061200 over range microwave. Problem started a few days ago with a clicking sound from the RH side of the unit (seemingly behind the control panel), about 3 clicks per second for about ...
...work but the food doesn't cook. Listening carefully, it sounds like a klixon or a safety overload clicks a second after the unit comes in. This makes me suspicious that either there is an
164 questions posted
Usually answered in minutes!
3,405 Questions
567 Questions
285 Questions
308 Questions
257 Questions