GE JVM2070 Microwave Oven "shutting sensor" Questions

microwave shuts down when hot the microwave shuts down completely when it gets hot. i have suffent space around the unit for air circulation. what can i do. Most microwaves have a temp sensor or ...

...shutting after 3 second. When I tried to cook on sensor mode it shut down after 10 second. It does not cook at all. Your temperature sensor inside on the microwave need to rreplace. It maybe dirty or ...

...sensor reheat, timed cooking and found the same thing. Only works for a minute and then shuts down with no beep. I love this microwave and would like to have it fixed if possible. try unplugging it. ...

Double oven that lost power and will not reset and comes up with F o3 Hi and weclome to FixYa, I am Kelly The oven temp sensor has failed. When the sensor fails the range control unit shuts off the ...

Microwave shuts off before time elapes My microwave shuts down after 14 sec everytime, no matter what the time is set at. Why does this happen? If it stops at 16 seconds and is a sensor model, it ...

Panasonic NN-H965WF Microwave oven The sensor reheat and sensor heat no longer works. When you start the sensor reheat, the microwave will start for about 10 seconds and then completely shuts off and ...

ge pvm2070 shut off and now will not come on My PVM2070 Spacemaker Microwave quit working & its DEAD. I checked circuit braker, unplugged unit, checked power is ok, open/shut door, pushed very ...

f4 or f5 on board if i unplug it and reset clock turnit on it runs for 2 or 3 sconds the display starts to blink it shuts off and you need to unplug and start over sometimes it will work see this and ...

Where is the sensor for the auto vent fan feature? The fan doesn't shut off. Found the wiring diagram, which showed where the sensor was. I am surprised that this diagram was not available online.

SHARP R9H52. Any operation involving convection shuts down after 4.15 minutes.Works fine in microwave mode. Because of the same duration every time it looks like a software problem. I suspect the ...