ICOM Informatique Icom Radio U16, IC2GAT, CM7, BP7, GMRS, HTX202, HTX404 Compatible Battery "signal meter" Questions

...meter shows the signal, and the dial light changes color as it should when a signal is being received. On 440, all receiver functions work properly; including the audio. Do you have any suggestions ...

...for full receive, the s-meter goes to +15db over and slowly climbs back to 25 over. I can receive signals strong enough to get past the "floor" of the receiver. Suggestions where to begin? One of ...

...supposed to do to optimize the signal of certain channels?? you need a swr meter to check your standing wave. its a cheap antenna get a wilson 1000 or 5000 antenna and it will talk a hell a lot ...

signal on the radio's meter. I have gone over it all with freeze spray and a heat gun but can't force the problem to go on or off. It just fails when it feels like it and comes good when it feels like

no signal on 2mtrs I get no audio on two meters and sql blocks audio turn the squelch down?

...SOUND NOT EVEN A HISSING SOUND , TX STILL OK If you are still seeing meter deflection in received signals, it sounds like something in the audio amplifier went

...signal strength (S meter reading) is low, check RX + 8VDC; try using an external speaker in case of a faulty internal speaker; exercise the AM/FM switch.If all of the above checks good, then signal ...

...reset and still cannot even hit the repeater in my small town....It will transmit / receive garbled signals in the FRS bands but nothing in the 2 meter, 70 cm bands It's not programmed right. You can ...

...signal are detected and the s-meter level was mesuring s3 to 5 minimum. Any time I try to transmit when passing in reception an ACG sourge is detected for 4 to 8 seconds ( S-Meter up to S-8) and the ...

...meter to sense the incoming signal / I played with the connectors and the S meter started working. Well it quit again so I'm back to guessing incoming signals. Can you give me an idea to fix the ...