Kenwood KM800 Major Classic Stand Mixer "control module" Questions

...module and speed control sensor so should be very easy fix. I don't know if anything else sits in the motor where you can see the wires and two carbon brushes. Question edited for clarity. Question ...

kenwood will not turn model#a901 Change the control module on the machine

...either a thyristor as the control device or a diac/triac pair mounted on a small circuit board. Later types probably use a speed control module similar in principle to those found in power

...control module on a Hobart Grinder Mixer blink 6 times. I lost my manual Reset Malfunction is 6 Blinks. https://www.google.com/search?q=Hobart+Grinder+Mixer+blink+6+times MANUAL mg1532 mixer-grinder ...

...control module in them. look it up on e=Bay they have all sorts of them depending on model. I would be looking for *a broken wire on the speed control plate under the back cover *correct operation of ...

module after taking the head casing/chasis off. It repairs it but then iut comes back again for no apparent reason. It also goes away on it own and works fines for no apparent reason. Hi. Get in touch

...control module - nothing doing. My next step is replaing the motor, unless someone else has an idea. The info I've seen on the hall field sensor impies this is a speed control issue, and I have no ...

...module that's deffectice? I'm not quite sure about this answer but it occurs to me that it could be the governor. It sits at the back end of the armature and as the speed control is slid to faster ...

...control module and there seems nothing wrong in it, no burnt components or no dry solder even. A failed SCR or triac will not always show visually any sign of failure.  Chances are good that is ...

kenwood km020 variable speed on full all the time. sounds like the triac or one of the main caps have blown on the circuit board - easy inexpensive fix Had the same problem. The module registering the